Social Media Scroll
We had a great turnout for last night's meetup, and it was great meeting all the new faces. A topic that was mentioned was NASA's 3D Resource site. Here's a link to the site. So, check it out when you can and show off anything you might print at the next meetup.
science.nasa.gov
The 3D Resources hub stores 3D models related to NASA's various missions. Some of these models are 3D printable! All of these assets are free to download and
Do you have something you want to build, machine or 3d print but need to design it first ? Come to FUBAR and learn basic CAD this Wednesday at 7:30 PM.
www.meetup.com
### Beginner CAD in Onshape: Design From Zero to Your First Real Part Curious about 3D design but not sure where to start? This hands-on beginner class is built for people
Tomorrow night at FUBAR labs, this is open to all. 7:30 PM at the space.
New Jersey 3D Printers Club, Mon, Jun 15, 2026, 7:30 PM | Meetup
www.meetup.com
Fubar Labs will host the New Jersey 3D Printers Club. Let's get our New Jersey 3D printers club together. If you have one printer, a few, or are thinking about buying one,
Are you a 3D printing enthusiast or just want to learn ? Join us for the kick off of the NJ 3D Printer's Club meeting at FUBAR this Monday.
New Jersey 3D Printers Club, Mon, Mar 16, 2026, 7:30 PM | Meetup
www.meetup.com
Fubar Labs will host the New Jersey 3D Printers Club. Let's get our New Jersey 3D printers club together. If you have one printer, a few, or are thinking about buying one,
Learn how to fix your broken electronics or build basic circuits. It starts with learning to solder.
Soldering Sunday - Learn to Solder, Sun, Mar 15, 2026, 1:30 PM | Meetup
www.meetup.com
**Soldering Sunday** encourages novice makers of all ages and skill levels to learn electronics and soldering through hands-on activities.
We still have some seats left in the CAD class. See the full description and sign up on Meetup.
www.meetup.com
### Beginner CAD in Onshape: Design From Zero to Your First Real Part Curious about 3D design but not sure where to start? This hands-on beginner class is built for people
Curious about 3D design but not sure where to start?This hands-on beginner class is built for people who have never designed anything before and want a clear, friendly introduction to CAD (Computer Aided Design). We’ll use Onshape, a modern, browser-based CAD program that runs on most computers-no special software install required.
Micro-controller Monday is back after a bit of break. Will be covering some AI assisted coding at the meeting next Monday at 7:30 PM
Microcontroller Mondays, Mon, Feb 23, 2026, 7:30 PM | Meetup
www.meetup.com
Back after a bit of a Holiday hiatus - Will be doing a bit of a demo on AI assisted micro controller programing this month Do you want have a physical computing applicatio
Join us on Feb 18th to learn CAD for digital fabrication.
www.meetup.com
**Beginner CAD in Onshape: Design From Zero to Your First Real Part** Curious about 3D design but not sure where to start? This hands-on beginner class is built for people
Join us on Dec 10 for a Santa's workshop class.
Laser Cutting Holiday Decorations
www.eventbrite.com
Join us in person to laser cut cool holiday decorations and get festive with crafty vibes!
It’s official…we’re bringing back Soldering Sunday! Come join us at FUBAR Labs Makerspace in New Brunswick NJ if you want to get hands on and learn how to solder - all ages and skill levels are welcome. Hosted every other Sunday starting this Sunday at 1-2pm. Register via our Meetup or just walk in.
This content isn't available right now
When this happens, it's usually because the owner only shared it with a small group of people, changed who can see it or it's been deleted.
Yes we still have the Microcontroller meetup on Memorial day at the space 7:30 - 9
Microcontroller Mondays, Mon, May 26, 2025, 7:30 PM | Meetup
www.meetup.com
Yep this is still going on Memorial Day ! This will go over setting up a Raspberry pi Pico C/C++ development environment or NFC card reading depending on interest. We gener
Presented by FUBAR Labs and GSCRL. WATCH THE LIVE STREAM www.youtube.com/live/qxhn__PMddo?feature=shared 11am Eastern Time
This content isn't available right now
When this happens, it's usually because the owner only shared it with a small group of people, changed who can see it or it's been deleted.
Seasonal Smackdown 2024 Live Stream
GSCRL's Seasonal Smackdown @ Bridgewater Mall (Day 1)
www.youtube.com
Streaming live from the Bridgewater Mall Tournament, the Garden State Combat Robotics league presents our December qualifying tournament.Day 1 will be the An...
Next Robot Build Night is Jan 7th. This build night we reviewed the anatomy of a combat robot and created a getting started parts list.
Keep Calm. Vote! And let's Make Robots!!!
This content isn't available right now
When this happens, it's usually because the owner only shared it with a small group of people, changed who can see it or it's been deleted.
Join us for this event Saturday
This content isn't available right now
When this happens, it's usually because the owner only shared it with a small group of people, changed who can see it or it's been deleted.
Champs Event is live until 10pm ET. IT'S BEEN AMAZING CHAOS SO FAR!!!
GSCRL 2024 Season Championship
www.youtube.com
Streaming live from the NJ State Fair. Please go to https:/gscrl.org for more information, including links to brackets. If the livestream fails, we'll upload...
New Date: Don Slepian will again be performing live, on September 21. 2024, at Fubar Labs, 1510 Jersey Ave, North Brunswick, NJ, from 3pm to 5pm. Don's performance will be both educational as well as entertaining. There really is no charge, but if you care to make a donation to Fubar Labs, that is welcome. FUBAR Labs ar is central Jersey's premier Maker Space. fubarlabs.org/
May the 4th be with you. Robot combat finals:
Garden State Combat Robotics League | May The 4th Be With You (May Qualifier)
www.youtube.com
Streaming live from Warren County Technical School, the Garden State Combat Robotics League is proud to present our May Qualifying Event. Thank you to WCTS ...
One of our partner orgs, the Garden State Combat Robotics League is streaming their January event live at www.youtube.com/watch?v=pP8U7EDJNRg! Tune in for combat robotics carnage!Hosted at the Ideal Farm and Garden Center.
Garden State Combat Robotics League | January Qualifier
www.youtube.com
Streaming live from Lafayette NJ, the Garden State Combat Robotics League is proud to present our January Qualifying Event. --- more info ---Event Info: htt...
ThinMint, with the blood red holiday impactors, went 2 wins and 2 losses at Season Smackdown 2023.
Another amazing event is happening tomorrow. FUBAR Labs members are both supporting and competing in this amazing event at Bridgewater Commons in NJ Sat Dec 9th. Join us live or in person. Live stream YouTube.com/@gscrl
This content isn't available right now
When this happens, it's usually because the owner only shared it with a small group of people, changed who can see it or it's been deleted.
Everyone is invited to the Synthesizer Meetup Saturday , Oct 21, 3pm at FUBAR Labs . It will feature a performance from donslepian.com/Don Slepian, Electronic Music Pioneer Don Slepian
Don Slepian – Electronic Music Pioneer
donslepian.com